Invoice Creation and Capture - Paper Invoices Creeping through the Backdoor!
Most companies run a pretty tight ship. A typical manufacturing company may have streamlined its staffing costs, reduced the administration overhead, installed, set up manufacturing partners in China and perhaps started selling products and services over the web. They've worked hard to maintain their competitiveness and are proud of their achievements... and so they should be.
But, walk into any company, large or small, and you'll still find an accounts team processing paper invoices. Ok, some of the large organisations have invested heavily in e-Business initiatives, document management software, electronic trading portals or perhaps EDI (Electronic Data Interchange); but when you dig a little deeper there are still paper invoices creeping in through the backdoor. It's often the small suppliers and customers who create the problem. They can't and won't invest thousands of pounds in new technology and business procedures. They don't have the volume, the cash or the inclination to make it work. We all accept that processing a paper invoice is crazy in this day and age, but how do you create a strategy to deal with the real world.
The Small Guy
So here's the problem: we need an e-Business solution which will cope with our largest suppliers but we also need an e-Business solution which will cope with the "Small Guy", a company with 5 employees running Sage Line 50.
What's out there?
Before we can consider a way forward, we need to consider what invoicing methods are already out there. So let's consider the pros and cons of each. The table below isn't designed to be a definitive guide, more a way of considering each option and the suitability to the "Small Guy".
Post Paper Invoices
Cost to Send: High - at least £0.5 per invoice.
Cost to Process: High - Everyone quotes different figures but £10 to £20 to process an invoice isn't far off the mark.
Pros/Cons: Anyone can raise a paper invoice. Simple setup with little technology required. Environmentally unfriendly - paper cost, printing cost and postage. Processing costs are high and automation is difficult.
Cost to Send: Low - but there can be a transaction charge.
Cost to Process: Low - >£1 per invoice
Pros/Cons: Automated. The use of an agreed standard. Some setup cost both in terms of technology and human input. On-going charges.
Email or FTP of XML files
Cost to Send: Low - no transaction charge (email is free).
Cost to Process: Low - >£1 per invoice.
Pros/Cons: Simple to automate and no transaction charge. High setup cost both in terms of technology and human input. What XML schema do you use? You may have to support multiple schemas.
Email or FTP of CSV, ASCII text or other structured data formats
Cost to Send: Low- no transaction charge (email is free)
Cost to Process: Low - >£1 per invoice
Pros/Cons: Simple to automate and no transaction charge. Low technology cost for sender, but receiver carries the cost of processing. Less reliable than XML.
Cost to Send: Low.
Cost to Process: Low - >£1 per invoice
Pros/Cons: Once setup, the process can be automated and large volumes processed automatically. Can be custom written, which incurs a high setup and maintenance charge.
Data Translation Bureau
Cost to Send: Low
Cost to Process: Low - >£1 per invoice
Pros/Cons: Simple to setup - somebody else does the work! There is normally a setup charge and often a small transaction charge.
Living with Paper
One approach is to accept things as they are and to accommodate paper invoices. In other words, capture the information off the paper and make it available to your AP system (Accounts Payable system). Over recent years, lots of time and effort has been spent on improving document management software and the technology behind scanning and recognition software. The aim of this software is to reliably convert a paper document into electronic text. This type of system combines OCR (Optical Character Recognition) technology and contextual logic which looks for key words within the document and associates them with title data on the document. For example, when you find the word "Date", the data nearest to it is normally a date field. With this knowledge, you can surmise the likely formats and possible values for the field you've just captured and can automatically discount some possible OCR results (e.g. a month value will never be above 12). By combining technologies such as artificial intelligence, multiple OCR engines, and contextual/fuzzy logic, these systems give improved results over the use of fixed OCR templates - some vendors claim character recognition rates > 90%. However, they are costly to purchase and often complex to setup and refine. Many use a knowledge base which must be taught to recognise the type of invoices you receive. No matter how much effort you spend implementing your document management software, no system is 100% accurate and errors will always creep in through all sorts of factors: dirty, crumpled or torn paper, changes to invoice layouts or even scanner faults.
Law of Diminishing OCR Returns
As no document management software system will give you 100% recognition rates, do you double check all of your results or do you accept the odd one will slip through the net. Unfortunately, it's the odd one slipping through the net which costs money to track down. It makes sense to aim for as high a recognition rate as possible, but this type of approach has a major drawback, it follows a law of diminishing OCR returns. The more time and money you spend trying to improve OCR performance, the smaller the increase in recognition.
If your document management software is achieving an 80% recognition rate, you may have to spend £5,000 to achieve a 5% improvement. Once you get to 90%, that same 5% may cost you £50,000.
Paper = Cost
When you look at the costs of creating and processing a paper invoice, one thing jumps off the page at you - COST. Do you spend time and money trying to read paper, or do you invest your time into grabbing it electronically, and processing it through your backend systems with document management software.
On so many levels, environmental, speed, cost and reliability, electronic trading is the way to go.
Electronic Trading - Don't Bully the "Small Guy"?
OK, if you accept some sort of electronic trading makes sense, how do we connect with the "Small Guy" who has no investment in document management software? What's needed is a fresh approach, one which complements the existing infrastructure, but gives us more flexibility. Focusing again on the "Small Guy", 9 times out of 10, he'll use a computer system to create an invoice. So why does he convert his computer data into paper, only for the receiver to convert the paper invoice back into an electronic file, or at least re-key it into an AP system, at the other end?
Stipulating, demanding or even forcing an EDI / customised e-Commerce solution on the small supplier won't go down well. Why should the "The Small Guy" go through the pain and expense of implementing EDI, when his customer gets all the benefit. The only time this tack works is if you're a very important customer, with a lot of power!
Is there a simple answer everyone's missed so far? No, not that we're aware of! What's needed is a variety of low cost, e-commerce options.
A responsible partner must offer a number of electronic trading options and a good starting point is to ask what your supplier can deliver. Have they already invested in document management software and if so, what is it capable of?
• Can your supplier send any of the following formats, XML, CSV, EDI format or ASCII text?
• Can you send an Adobe PDF image of your invoice?
• If the answer to the above is no, then it may be worth considering a simple alternative. A simple, low cost "print capture client" is available, which will take printer data and convert it into an electronic format (e.g. ASCII text) which can then be automatically emailed.
• For suppliers without a computer system, provide them with a spreadsheet to fill in, which can be emailed back or perhaps a web portal/HTML form which can capture invoice data.
If you are going to offer a variety of invoicing methods, you need the tools to process these options efficiently. Output management software is an ideal "document translation hub" to do this.
When used for simple e-Commerce, output management software (OMS) performs 3 major functions, these being:
1. Import - OMS will collect virtually any type of data be it CSV, ASCII Text, XML, EDI files, data in Emails, data from web pages or even MS XLS spreadsheets.
2. Recognise and Validate - OMS will read the data and check what has been received prior to any further action. Errors will be picked up and resolved through a workflow process.
3. Translation - OMS will translate the invoice and make it available for virtually any back-end business system (from SAP to Sage). It will also create human readable copies for a long term archive, which can automatically be submitted to a document management software archive. UK invoices should be kept for 7 years for VAT/TAX legislation.
Some suppliers can only email an image of the invoice in PDF format. In this instance, most OMS systems can extract the PDF attachment from an email and submit it to a document recognition system. It can then be passed through an approval process before archiving into a document management software archive. For those suppliers who can only print a paper invoice, there is even a low cost capture client which will take printer data and email it back to the OMS Server for processing.For companies who already use EDI software, OMS can be used to create human readable copies of EDI transactions (typically in PDF format) and store them into a document management system. Where errors occur in an EDI process, OMS is an ideal way of picking up the error and starting a workflow procedure to resolve the problem.
Joe Hyde - About Author:
Author – Joe Hyde
I'm the Sales and Marketing Director of Document Genetics.
Document Genetics is an established UK based company providing a comprehensive range of document management solutions. We focus on improving document automation, workflow and collaboration within our client organizations, and our range of innovative solutions and specialist services help to save time and money by processing documents and data more efficiently.
Published by Andy Robert on April 12th 2012 | Software
Published by Angel on July 17th 2012 | Software
Published by Martin Tuner on December 8th 2011 | Software
Published by Antony Wilmer on November 28th 2011 | Software
Published by Caitlin Jones on November 25th 2011 | Software
Published by Elizabeth Cooper on March 19th 2012 | Software
Published by Maria Getchell on January 10th 2012 | Software
Published by Mary Porter on July 6th 2012 | Software
Published by Top Articles on November 28th 2011 | Software
Published by Hemelwasen on November 28th 2011 | Computer
Published by Caitlin Jones on January 20th 2012 | Software
Published by Ronan Pointy on July 5th 2012 | Software
Published by Caitlin Jones on December 29th 2011 | Software
Published by Caitlin Jones on February 6th 2012 | Software
Published by Online Sharing on March 1st 2012 | Software
Published by Antony Wilmer on December 13th 2011 | Software
Published by Ronan Pointy on March 14th 2012 | Software
Published by Jamessms on February 1st 2012 | Software
Published by Mahesh Lodhaya on August 11th 2012 | Software
Published by Angel on July 11th 2012 | Software