Window Maintenance 101: Proper Glass Film Installation
People are becoming more aware of environment issues, and they are finding ways to reduce the impact on the environment of remodeling and construction. Going green is the ideal thing to do. Luckily, there are lots of environment-friendly approaches, like the installation of plastic sheet coating onto your windows.
Plastic sheets are the cheapest materials you can acquire in keeping the entire quality and atmosphere of your home free from moisture and heat. Because the windows are the coldest surfaces in the house, you need to properly maintain it all year round. It’s where you would first notice signs of condensation. If not fixed promptly, this can lead to deterioration.
Taking precautionary measures and solutions is the best way to prevent damage and humidity. Installing plastic sheets is the best thing that you can do to protect your windows. Here are some helpful tips in properly installing plastic sheets.
Prepare the Materials
The first step in the installation process is the preparation of materials. You can buy heavy duty plastic sheets at the hardware, and they often come in kits. Some plastic sheets only have a shrink film sheet. Opt for the one that’s self-adhesive as they’re much easy to install. You will also need a sharp razor or scissor and a hand-held dryer during installation.
Clean the Windows
After you take the shades and curtains off the window, you can clean the glass surface. Doing so would free your glass surfaces from accumulated substances and grit. It needs to be polished as you’ll be placing the heavy duty plastic sheet on the glass surface of the window.
Apply the Plastic Sheet
As mentioned, heavy duty plastic sheet is commonly self-adhesive for easy installation. If they aren’t, tape can be used to keep the sheet in place. To install, cut a section large enough so that you’ll have an extra inch of overhang on all sides. Once you remove the plastic backings, gently apply the upper two corners of the sheet onto the glass surface. Repeat the process on each side, securing the film top to bottom.
Using your hand-held dryer, slowly shrink the plastic sheet tightly across the window. Set the dryer to the highest setting and move the dryer across the sheet until the wrinkles have disappeared. Don’t let the dryer touch the plastic as it will melt the surface of the material. Trim off the excess plastic once you’re done. Visit ehow.com for more info about the proper installation of heavy duty plastic sheet on windows.
Published by Miketysonwillson on December 15th 2011 | Business
Published by Cliff on July 30th 2012 | Business
Published by Poptents on July 16th 2012 | Business
Published by Ashish Pandey on April 20th 2012 | Business
Published by Angie Turner on June 16th 2012 | Business
Published by Liza on January 15th 2012 | Business
Published by Rich Mond on June 19th 2012 | Business
Published by Feckler on March 14th 2012 | Business
Published by Francesca on January 9th 2012 | Business