How to Manufacture an Electromagnet for Sale
Electromagnets are nothing but coils of wire fixed around a metal core that produces a magnetic field whenever electricity is passed through its surface. These are widely used in a large number of devices starting from computers to cars which makes the electromagnets for sale one of the most sought items in the markets.
However, for people who prefer to design such an electromagnet manually, the task is never going to be difficult to accomplish but for a successful design implementation, certain factors should be taken into serious consideration.
In most cases, home made electromagnets are made of a copper coil patched around a metallic base. The strength is calculated based on the number of items that it can attract. The materials that will be needed comprises of copper wire, ferrite rod, solder, soldering iron and tape.
To get started with the process, take the copper coil and tightly strap it across the ferrite rod. Remember to wrap the coil on one side of the rod only, that’s very important. Avoid any overlapping of the coils. Fasten the coils to the rods using a tape. After completion, repeat the same process but in an opposite direction i.e. from bottom to top. Two parallel spirals should be designed moving from bottom to top. Make sure that the coils are tightly fastened and do not slip at any stage later.
Next, take the free ends of the coil wires and solder them to a variable direct current (DC) supply. Set the voltage level somewhere around 5volts. Remember, over consumption of electricity can lead breakage of magnetic field and may damage the electromagnet. Therefore, it is advisable to use minimal electricity for best results.
Published by Olegch on March 11th 2012 | Business
Published by Dany on May 3rd 2012 | Business
Published by Businessbrokers on December 22nd 2011 | Business
Published by Camille Smith on June 30th 2012 | Business
Published by Kristy Wilder on January 23rd 2012 | Business
Published by Mett Silver on August 6th 2012 | Business
Published by Andy Chatterjee on December 27th 2011 | Business
Published by Mark Twain on May 16th 2012 | Business
Published by Mary Porter on June 17th 2012 | Business
Published by Sourcesolid on February 8th 2012 | Business
Published by Harry on April 4th 2012 | Business
Published by Harry on April 9th 2012 | Business
Published by Bicyclesuk on April 16th 2012 | Business
Published by Harry on March 7th 2012 | Business
Published by James Blee on December 20th 2011 | Business
Published by Simona on January 15th 2012 | Business
Published by Gayathri Baladevi on August 21st 2012 | Business
Published by Harry on July 4th 2012 | Business
Published by Harry Ackerman on November 28th 2011 | Business
Published by Harry on March 5th 2012 | Business