Selecting commercial flagpoles

Author: reikopena | Posted: 14.03.2012

Commercial flagpoles tend to range from 30 to 60 feet and are made usually of single piece of steel or aluminium tubing. Depending on the situation, you might want to order 2, 3 or more of the commercial flagpoles. But, you need to make sure that there is enough space in between the flagpole parts so that the flags have enough space to wave and can be grown in case there are more requirements for bigger flags at a later stage.

You can find 2 kinds of halyard systems, pulley or rope systems for lowering and raising the flag. The external halyard system is located on the pole’s outside. In this kind of rigging, the flags are attached to the rope, which is again looped through a wheel or truck, at the flagpole’s top. The rope is then wound at the bottom around the cleat in order to lock the flag in its place and also prevent it from falling down the Commercial Flagpoles. The only issue with the external halyard systems is its security, as the rope could be easily cut by someone.

For durability and security, you are advised to select an internal halyard system, which has cable or ropes located on the pole’s inside. It is also accessible with the help of a special winch present in the compartment of a hinged door located at the shafts’ base. You then need to select a revolving truck, which would help the flag from being wrapped around the pole when wind tends to change directions. Steel is the most preferred when choosing flagpole parts. They are easily available in the market and also require no maintenance. You can simply book your own flagpole parts from the websites present and can also enjoy discounts. You can simply buy any type of flagpole to meet your requirements.

Article was printed from http://www.articleside.com/advertising-articles/selecting-commercial-flagpoles.htm
Click here to return original format