Installing an Automatic Gate System on a Budget using our Automatic Steel Gate frame

Budget Gates Sydney manufactures a purpose built galvanised steel gate frame designed specifically for automatic installation.

The galvanised steel gate frame can be installed in any situation where an automatic swing gate, automatic sliding gate or automatic cantilever gate system is required.

This galvanised steel gate frame is ideal for architects, builders, landscapers or the home handyman who is working to a budget but still requires a properly set up automatic gate system.

The steel gate frame is designed to allow for cladding whether it be timber, lattice, battons, or panels/sheeting designed by an architect or builder. Basically any sheeting you wish to have as your final gate finish can be attached to the automatic gate frame.

Once the Automatic Gate Frame has been installed and the automation system has been commissioned, you will have a automatic gate frame that will operate via the press of a key ring remote control. It is then simply a matter of fixing your preferred cladding to the gate frame and your gate is finished. This cladding can be fixed by any builder, landscaper, handyman or yourself, its that simple.

By supplying and fixing the final cladding yourself you save a lot of money. It also gives you, your architect, builder or landscaper the freedom to match your gate to existing detail that may already be on display on the property and you wish to carry the theme to the finish of your automatic gate system.

For Automatic Swing Gates an installation using the Budget Gate Sydney gate frame system is simple. The swing gate is set up with a 100mm x 100mm galvanised steel post/s depending on whether it is a pair of automatic swing gates or a single automatic swing gate as to how many posts will be required.

The gate frame is hung using heavy duty ball bearing hinges designed to take excessive weight for when the gate has finished been clad.

The automatic swing gate operator/s are installed and commissioned to the gate along with the electric latch which is required on all swing gates over 2.8mtrs wide.

The Automatic Swing Gate Frame is then completed and operates via the press of your key ring remote control. The gate frame is then ready to be clad by yourself, your builder, landscaper or handy man with which ever product you choose.

For automatic sliding gates or automatic cantilever gates the galvanised steel gate frame is set up on a 90mm ‘u’ groove track along with the associated rack and pinion track which is a steel track system coated in nylon to ensure whisper quiet operation. Also included in the installation is the guide post and guide block for the sliding gate frame.

Once the sliding gate frame or the cantilever gate frame has been installed the sliding gate operator is commissioned. The automatic sliding gate frame or automatic cantilever gate frame is then easily operated via the press of your key ring remote control. The gate frame is then ready for cladding by yourself, your builder, landscaper or home handyman, once the cladding of the gate is done your system is complete.

The Automatic Gate Frame gives you a reliable well set up automatic security gate system, all you have to do is attach the final cladding to the gate once Budget Gates Sydney completes the full installation and commissioning of the system.

Mackey - About Author:
For more information about Automatic Gate, please visit www.budgetgatessydney.com.au

Article Source:
http://www.articleside.com/shopping-articles/installing-an-automatic-gate-system-on-a-budget-using-our-automatic-steel-gate-frame.htm

Related Shopping Articles

Related Shopping Topics

fedora hats piano light piano lamp wedding film wedding films cheap costumes ride on toys travel case ghd glattejern