Installing Tiles: a Concise and Detailed Guide

Author: alanageikie | Posted: 09.03.2012

You can find proof of how durable tiles are in the ancient Roman houses that still have their tile flooring in a pristine state.

If you’re planning to install tiles on your own or if it's your first time to do so, you have to understand the proper techniques in tile installation. It isn't as easy as it seems, so be sure you also have all the necessary materials ready before you begin. Listed here are the steps for a good quality tile installation project.

Prep work. Before setting up your first tile, you have to plan a layout that enhances the number of whole tiles and minimize the utilization of cut tiles. Make a dry layout, putting all of the whole and cut tiles on top to see if they fit. Later on, be sure that the surface exactly where you'll install your tiles is effectively cleansed and free from any protrusions. Scrape away any dirt and grime. Wipe away dust with a wet cloth and let it dry thoroughly. Next, blend an adequate quantity of thinset mortar. It really is advisable that you use a latex additive instead of water so that the tiles can have a solid groundwork to bond on.

Assembly. Push the mortar onto the surface to be tiled through a trowel. Spread the mortar throughout the space in long, even strokes. Remember that the thickness of your mortar will be based upon the size of your tiles. A small tile will require a mortar width that corresponds to its own, while a big Provenza tile would only require mortar that is half as thick.

Put the tile squarely onto the mortar with your fingertips. Push it down with a little twist of your wrist. Repeat this technique accordingly for every tile or tile sheet. Be more cautious when you are installing small tiles like the Vetro glass tile. Ensure that you apply consistent pressure for each tile to avoid getting misaligned tile levels. As soon as all of the tiles are in place, let them set overnight.

Polishing. Once the tiles have been set, remove any mortar from the tile surface and joints. Whether you are making use of Vetro glass tiles or any form of tile, it truly is significant that all of the mortar is removed to help keep your work clean. Mix a batch of grout and apply it onto the spaces between the tiles utilizing a trowel. When applying grout, you must start from the end of the space towards the center. Allow it to dry for 30 minutes, and then clean any unwanted grout using a wet cloth or sponge.


About Author:
For more details, please search " Provenza tile, Vetro glass tile, and Vetro glass" in Google.

Article was printed from http://www.articleside.com/home-improvement-articles/installing-tiles-a-concise-and-detailed-guide.htm
Click here to return original format