Article Side

Online Article Directory!

Hello Guest! Login or Register to submit articles!

Why switch to RMC?

By James Arther Subscribe to RSS | May 15th 2012 | Views:
loading
 
  



Every construction site needs concrete and technology has come a long way in making it more accessible and easy to use on site. Ready mix concrete or RMC as it is popularly know is made at a plant and then brought to the site in the ready form in a truck. This actually helps speed up the process of construction on site and helps the builders meet delivery deadlines.

RMC is generally made of a mix of cement of around 10 to 15% to which a 60 to 70% aggregate is made and 20 percent water s added. The cement itself has a composition of limestone sand or makes use of shale or clay. The aggregates that are used are that of sand, gravel as well as rock. This kind of readymade concrete is easily used on small as well as large construction sites. You will find it especially utilized in the making of driveways as well as in foundation of homes and large commercial buildings. It is also made use of n the creation of infrastructure such as bridges, roads and sidewalks.

Besides being able to reduce the time of construction, RMC has several other advantages. One of them is that the quality of concrete is much higher than that of concrete that is mixed at the site. This however is largely dependent on the kind of controls and checks that are put in place by the builder at the plant. The problem of storage on site and deterioration in quality of the materials is also a matter that is taken care of. This is specially in the urban set up where storing of steel reinforcements and construction materials is often tight.

When you are using RMC on a site, you bring down the need for supervision on the site and thereby the cost of labor as well. These costs are often incurred over the cost of procuring a batch of raw materials and then mixing the concrete at the site.

RMC plants today have most of the process automated and are able to measure the amount of surface moisture present in aggregates. This is essential in managing the ratios at which water and cement mix. It is essential to ensure that the right strength and durability is obtained. Because of the automation process the control and check process can easily be enforced at every level of RMC manufacturing. Consistency can therefore be maintained. Because of the use of mechanization, the use of newer materials such as micro silica and fibers can easily be introduced.

James Arther - About Author:
Welcome to S S Concrete, We are offer Ready mix concrete Wolverhampton to you on prices hard to beat. we also provides range of benefits that makes it easy for you to choose us for all of you Concrete Mix Wolverhampton needs. For more details browse our website today.

Share on Facebook Tweet It Stumbleupon this post This post is delicious !

Article Source:
http://www.articleside.com/home-improvement-articles/why-switch-to-rmc.htm

Related Home Improvement Articles Subscribe to RSS

The New Angle on concrete saw Just Released
Published by Edwardross on May 2nd 2012 | Home Improvement
As using the air as the coolant, dry reducing should be short and short. Moreover, the precious ston...
 
The Benefits of concrete polishing
Published by Edwardross on May 4th 2012 | Home Improvement
These diamond concrete grinding and polishing tools along with diamond concrete saw are enough to re...
 
Tips on using a concrete grinder
Published by Logancox on April 2nd 2012 | Home Improvement
Modern tools allow us to work a lot of magic. We’re able to accomplish so much with just a minimum...
 
The Ultimate Guide to concrete cutting.
Published by Edwardross on April 23rd 2012 | Home Improvement
If you have to cut the concrete slab below for plumbing work, remember, it is not an easy task. To p...
 
How to buy concrete diamond blades with precision?
Published by Mark Bruddy on April 2nd 2012 | Home Improvement
So you've chosen to purchase concrete diamond blades that will work in harmony with your project nee...
 
The Ultimate Guide to concrete cutting
Published by Devinpayton88 on May 15th 2012 | Home Improvement
Light concrete cutting and small shaping can be used with punches and designed specifically for cutt...
 
The Meaning of concrete polishing and concrete saw
Published by Edwardross on April 27th 2012 | Home Improvement
If you do decide to do it yourself, you'll need a small hand buffer, and buffing pads that fit the b...