How to Refinish a Deck Learning How to do the Job Properly
Knowing how to refinish a deck properly is imperative to successfully applying a waterproof coat. For example there are many steps that you will have to take before you can apply a top coat; otherwise the waterproof coat coating will not adhere to the wood. A major step in a refinish deck job is to inspect your deck of any rot or damaged boards. Replacing them now will ensure that you do not have to refinish and reapply you deck coat, saving you time and money.
Some of the tools that you will need to refinish your deck are a power washer and a sander. These are essential to doing a refinish deck job correctly. Use the correct power washer - preferably one that is not too strong and not too soft, either. A power washer can take paint and even old staining off, just don't use too much pressure otherwise you can ruin your wood. A sander with fine grit will take care of any small bits of wood that stick up from your deck. This will also make a great surface for your coat to adhere to. Knowing how to “refinish deck” is mostly sanding and power washing, and using proper techniques will help you transition into a smooth refinishing job.
The stain that you choose for your deck is very important and can make a huge difference in the life of your deck. You are choosing to save money by refinishing the deck yourself so don't skip out on the strainer. Using a more expensive oil strainer instead of a water based one will make sure that it sinks into the pores of your deck nicely. Always make sure that you apply to a very dry deck otherwise you will have to go back over your job and learn how to refinish a deck again!
The best conditions to refinish your deck are in the summer months when it's hot and dry. If you have to learn how to refinish a deck during the winter then make sure it's in a weather break. If you suspect bad weather is coming and you’re in the middle of refinishing your deck, try to cover it up to keep it as dry as possible. You can use a tarp with strong tape to cover your work surface, but sometimes that doesn’t even work. The best thing you can do if you’re in the middle of staining is to take it off and start over again.
Robert - About Author:
Robert Henson is a freelance writer who scours the Internet, searching for the best products and services to share online. For more specific details or information about how to refinish a deck, visit http://www.ccaplaygroundsolution.com today - learn more about how to “refinish deck” today.
Published by Kate Morgan on August 26th 2012 | Home
Published by Oleg Vasyliychuk on August 26th 2012 | Home
Published by Andy Brisebois on August 26th 2012 | Home
Published by Mehrdad Hadjikhan on August 25th 2012 | Home
Published by Donna Livingston on August 24th 2012 | Home
Published by Johndy Sons on August 24th 2012 | Home