Easy Guide to Help You Install an F Connector
The television cable industry widely depends on the use of coaxial cables. An F connector is essentially a component that is installed in a coaxial cable to connect it to the main system. It is a very vital component in transmitting electrical and informational signals. A number of transmission and distribution operations would be incomplete without this particular connector.
These connectors are used while installing new cables as well as when you need to replace existing cables if they are not performing well. Based on the size of your cable, the connector is also available in different sizes, hence it is important that you know precisely what size connector you need. Making a mistake in the size can be a total waste of time and money.
The installation process of an F connector takes some time to understand, especially if you are a novice at it. The installation process is rather different as compared with a PL-259 connector. This article aims to give you a step by step guide to installing such a connector:
•The first thing to do during the installation process is to strip the coaxial cable of its outer plastic covering so that a small part of the inner wire is exposed. You could use a cable stripper or a sharp razor to very carefully remove the sheathing.
•Now that the wire is exposed completely, you can slip on crimp rings onto the outer sheathing. These rings are very helpful in holding together the wire connection. The crimp shouldn’t be secured too tightly as you would need to move it again.
•After this, you would need to strip away the inner plastic sheath in the cable. Remember that some part of this inner sheath needs to be kept intact. Make sure you don’t inadvertently cut the copper wire while doing so.
•The next step is to slip on the connector in a way that the inner plastic core that you have left on. If you are able to see a small part of the copper wire through the hole of the connector, then you can be sure that the connection has been secured as desired.
As you can see, the method to install these connectors is rather simple as compared to other components such as the PL-259 connector, which requires soldering. It is also important to note here that the process of cutting the coaxial cable should be carried out with utmost care, otherwise you are exposed to the risk of cutting your finger.
While purchasing these connectors, look out for features such as threading at the edges for a better grip. Another desirable characteristic in an F connector is its ability to endure vibrations and pulls.
Joseph Koch - About Author:
I have many years of experience in electronic manufacturing industry. F connector is essential components in high speed cable modem, hybrid fiber coax networks and many more. I passionate about helping businesses succeed by sharing my knowledge related to desired PL-259 connector in New York. If you are looking for such type of manufacturing components you shouldn't start your search before you have a quick peak over here.
Published by Julia Roger on December 1st 2011 | Business
Published by Mayank Gandhi on March 28th 2012 | Business
Published by Fashionstudio1 on January 6th 2012 | Business
Published by Christy Jackson on January 11th 2012 | Business
Published by Sodapromo on March 12th 2012 | Business
Published by Tdakotaair on April 17th 2012 | Business
Published by Gayathri ChintuDevi on May 12th 2012 | Business
Published by Ashish Pandey on April 20th 2012 | Business
Published by Joseph Wilson on December 20th 2011 | Business
Published by Ricky Williams on February 27th 2012 | Business
Published by MHT Lighting on July 30th 2012 | Business
Published by David Ribeira on February 21st 2012 | Business
Published by on June 21st 2012 | Business
Published by Samuel Arthur on January 7th 2012 | Business
Published by Gayathri Devi on March 12th 2012 | Business
Published by Zhuimeng on January 24th 2012 | Business
Published by Gayathri Devi on January 27th 2012 | Business
Published by on June 21st 2012 | Business
Published by Jamesbond on January 19th 2012 | Business
Published by John Davis on January 4th 2012 | Business