Cleaning Method of Swimming Pool Tile
Learn the cleaning procedures of swimming pool tile to keep your pool free of unsightly molds and dirt. You might be able to afford new pool plaster and tiles but to avoid this you should take sufficient care to keep it neat and clean. Here are some tips of taking care of pool surfaces to maintain its quality.
First, start by draining the pool of water. Suck out the residual water from the edges of the floor that are encrusted with lime deposits and hard water. Once the surfaces are dried, use a type of acidic gel cleaner found at a pool supply shop that is used for this purpose. The gel will actually seep between the edges of the floor and get soaked in the deposits so as to loosen the dirt and grime. The deposits that come loose can be scoured and those that are stubborn to remove can be scraped off by using a razor blade. Once the job is done, the gel and the residues need to be wiped away from all pool surfaces.
A professional will take care of the whole job by going around and inspecting every inch of the swimming pool tile and grout to know whether there is any place left unattended. If so, then he will clean it off using the same procedure and make sure that all surfaces are free of deposits and dirt. If there are cracks that need to be fixed, a professional pool renovation specialist can fill them with new pool plaster.
Published by Pinky Sharma on June 5th 2012 | Business
Published by Samuel George on February 11th 2012 | Business
Published by Canberra Marketing on December 4th 2011 | Business
Published by Ashish Pandey on May 5th 2012 | Business
Published by John Seller on March 21st 2012 | Business
Published by Premierpoolsandspas on December 24th 2011 | Business
Published by Mary Porter on June 17th 2012 | Business
Published by Premierpoolsandspas on December 23rd 2011 | Business
Published by Microcell Systems on February 6th 2012 | Business
Published by Microcell Systems on February 27th 2012 | Business
Published by Simon Dcruz on January 17th 2012 | Business