Beginner’s Guide: How to Fly and Get Your First RC Plane
Flying RC plane is a fun yet challenging activity. It gains more popularity today and becomes the favorite toy of both adults and kids. How about you? Are you also interested in flying this toy airplane? If you also want to try RC plane flying, firstly you need to learn how to fly it correctly. It is also essential to select your first RC plane carefully. You need to know exactly what kind of plane to buy for an enjoyable flying experience. Below are a few tips for beginners on how to fly the airplane and how to get the right RC plane.
Learning How to Fly
1. The easiest way to learn about flying an RC airplane is watching videos about it. From the videos, you will get an idea of how to fly and land it correctly.
2. Use RC plane flight software to increase your flying skills. The simulators are very helpful since you can learn how to fly RC plane without buying one. This is also safer for beginners since they can learn to fly without hurting their toy. The software allows you to learn flying anytime without limited by the boundary of weather condition.
3. Beginners are recommended to learn on trainer planes. They are created to be stable in the air. You can recognize a trainer plane by noticing its wing. The wing is located on top of the fuselage.
4. Nowadays, there are many RC flying clubs where you can join and learn to fly from an instructor. This is considered as the best way to learn as you can gain information from the expert.
Purchasing Your First RC Airplane
Today, there are various types of RC airplanes in the market. Below are the aspects you should consider when buying your first plane:
1. Size: You can measure the toy from its wingspan. The total wingspan size is measured from tip to tip. Commonly, a 50 inch length wingspan is considered as a good size. The size you should choose depends on your flying space and confidence level. The RTF electric park RC airplanes can be your ideal choice as their size ranging from 40 inches to 60 inches.
2. Stability: Stability is an important aspect you should always consider especially if you are a beginner. Make sure that you choose a plane with a high wing trainer. This design enables you to get better stability in the air.
3. Power: The power you choose depends on the location you want to fly your RC plane. If you plan to fly it in a park, an electric-powered plane would be an ideal choice.
4. Material: RC planes are made of various materials like foam, plywood or balsa wood. Foam is a light material and it is suitable for beginners. Meanwhile, balsa and plywood are heavier so that they tend to suffer greater damage in a crash.
5. Parts: Check your plane inside out before making purchase. Pay attention to the parts and other important aspects like wiring and transmitter sticks.
6. Final Assembly: Check the final assembly of your plane. Before flying it, make sure that you fix the wing, fit the propeller and spinner and secure the tail plane.
Published by Hydrocarbons Australia on January 9th 2012 | Business
Published by James Blee on June 16th 2012 | Business
Published by Jenniferraine on February 24th 2012 | Business
Published by Diego Hall on December 2nd 2011 | Business
Published by Johnathan J on June 13th 2012 | Business
Published by Mary Porter on June 20th 2012 | Business
Published by Smith Jhonson on March 28th 2012 | Business
Published by Duane Hope on December 23rd 2011 | Business
Published by Socialsecurity36 on May 1st 2012 | Business
Published by Mary Porter on June 17th 2012 | Business
Published by Canberra Marketing on December 3rd 2011 | Business
Published by James Blee on January 17th 2012 | Business
Published by Julia Roger on March 9th 2012 | Business
Published by Mary Porter on June 25th 2012 | Business
Published by Seolncr on May 7th 2012 | Business
Published by Mary Porter on June 29th 2012 | Business
Published by Alan Youghal on December 29th 2011 | Business
Published by Johnsmith on August 4th 2012 | Business
Published by Coloprilreview on November 25th 2011 | Business
Published by Julia Roger on March 14th 2012 | Business